Rainwater Harvesting Solutions for South African Businesses

What Sewtreat Does

SewTreat designs rainwater harvesting systems for commercial and industrial sites across South Africa, tailored to each facility’s catchment area and water demand. We size storage and treatment to suit the volume available. The water can then be reused for irrigation or process supply, with potable treatment available where your site needs it.

Rainwater rarely covers a facility’s full demand on its own, especially outside the rainy season. We integrate harvesting systems with river and dam water treatment or existing borehole supply, so your site has a backup source when rainfall drops.

Our Scope Includes

Roof and surface catchment system design
Storage system design (aboveground or belowground)
Rainwater treatment and disinfection systems
Integration with facility reticulation and monitoring systems
Turnkey supply, installation, and commissioning
Commercial rainwater harvesting storage tank installed by SewTreat in South Africa
Rainwater harvesting water treatment plant built for a South African facility
Rainwater collection and filtration system for industrial and commercial sites

Typical Water Treatment Process

Rainwater is collected from suitable roof areas and conveyed through a filtration and treatment process to ensure it meets the required water quality standards. A typical SewTreat rainwater harvesting system includes:

Pre-filtration: Removal of leaves, dust, and debris before entering storage.
Storage: Zincalume steel or concrete tanks ranging from 15 KL to 3 ML, available in various finishes for aesthetic and durability requirements.
Treatment: GFM (Glass Filter Media) and GAC (Granular Activated Carbon) filtration followed by disinfection to ensure water safety and quality.
Distribution: Pumped supply to irrigation networks, toilets, domestic line or process applications.

SewTreat rainwater harvesting solutions are ideal for facilities with large roof areas and available storage space, providing a sustainable alternative or supplement to municipal supply while supporting long-term water resilience.

Rainwater Harvesting Across South Africa’s Rainfall Regions

South Africa gets an average of 464mm of rain a year, roughly half the global average of 950mm. Rainfall also swings sharply by region, so a system built for Pretoria won’t suit a site in Durban or Cape Town.

The Western Cape is a winter rainfall region, with most rain falling between May and August. Gauteng, Mpumalanga and KwaZulu-Natal get their rain in summer storms from October to March, with Gauteng averaging around 700mm a year and coastal KwaZulu-Natal considerably more.

For sites in drier or highly seasonal regions, rainwater harvesting works best alongside a second source such as borehole water treatment or backup water storage, so supply doesn’t run short outside the rainy season.

Sizing a Rainwater Harvesting System for Your Site

Tank size depends on roof catchment area, local rainfall and how the water will be used. A simple estimate is catchment area in square metres multiplied by annual rainfall in millimetres, multiplied by a collection efficiency of around 0.8, which gives the usable yield in litres a year.

SewTreat installs tanks from 15KL up to 3ML in zincalume steel or concrete, sized to match that yield against your facility’s demand for irrigation, process water or toilet flushing.

Payback periods vary with tank size, installation cost and the municipal tariff a site currently pays, so most facilities see clear numbers once we’ve modelled their own roof area and water use. Use the Savings Calculator for a site-specific estimate.

Rainwater Harvesting FAQs

Free Savings Calculator

See How Much Money & Water You Can Save With SewTreat

SewTreat Case Studies

Read Our Case Studies